Charge your iPads with PoE.


with an existing 'Power over Ethernet' network:





Installation with a powered switch

If you can use an existing  PoE network, meaning
that a PoE switch delivers power to your ethernet,  
only one of our s15 splitters connected to this network will be necessary to power your iPad.

s15 C  for sDock Fix and sDocks (2. generation)
s15 L  for sDock Fix and sDocks (2. generation)
s15 m  for sDocks (1. generation)

PoE
s15 = Splitter + adapter cable
s15 is a splitter for active PoE solutions with input of 44 - 56 Volts. IEEE 802.3af compliant. PoE Splitter WT-AF-5V10W
Professional solution with Gigabit data. 

Perfect for conference rooms, kiosks and anywhere else you need a digital display.

Charge iPads from your existing PoE switch with these 5 volts Power over Ethernet splitter/converters. Stream data with an Apple Ethernet to Lightning adapter for wired data.

Place your touchscreen display where you want, not where the charging adapter can reach. Normal 5 volts charging cables for tablets won’t work efficiently for more than a few feet, but our 5 volts PoE splitters and PoE kits can run for hundreds of feet.




s15 L   sCharge PoE Lightning


s15 m   sCharge PoE micro USB


s15 m   sCharge USB C


with Apple Lightning cable  
total cable length  55cm (~1.8 ft)

s15 L factsheet


with micro USB cable  
total cable length  55cm (~1.8 ft)

s15 m factsheet


with USB C cable  
total cable length  55cm (~1.8 ft)

 

 

 

s26 L   sCharge PoE P+D
hot
PoE adapter for both wired data
and power
   
Power and Data for Apple Lightning devices
Compatible to sDock Fix Serie.

Perfect for conference rooms, kiosks, and anywhere else you need a digital display. You can now use one Ethernet cable to extend power and data to your iPad up to 100m (328 ft) away at gigabit speeds! This PoE adapter is designed to deliver both 5 Volts 12 Watts of continuous power plus wired data to iPad. 

   sCharge PoE P+D replaces the combination
   of three adapters that was necessary so far
   for data to the iPad:  

   standard splitter plus an Apple Ethernet adapter
   plus an Apple Lightning to USB adapter!


   
   with a fixed Lightning cable   Length ~ 90cm  (3 ft) 
   compatible to all sDock Fix mounts
   (for Lightning iPads)

   s26 L factsheet



without a 'Power over Ethernet' network


PoE Installation 
of a single iPad

If there is no existing PoE network,  you'll need a power source (Single Port Injector) and a suitable splitter. 

s25 C  for sDock Fix and sDocks (2nd generation)
s25 L  for sDock Fix and sDocks (2nd generation)
s25 m  for sDocks (1st generation)

si-26-1





PoE Installation 
of multiple 
iPads


With the 60W 8-port Injector Kit si-26-8  
up to  8 iPads can be powered very easily and reliable.
The s25 splitter either with Lightning or micro USB connector connects with the iPad.
Plug & Play.

si-26-8

s25 = Splitter + Adapter cable

Passive PoE Splitter WS-PoE-5V-2Amps  for input of 10 - 40 Volts.
Together with a 24 volts power supply and a single or 8 port PoE injector it is an easy power solution for a distance up to 100m (328 ft)

Perfect for conference rooms, kiosks and anywhere else you need a digital display.
Stream data with an Apple Ethernet to Lightning adapter for wired data.

Splitter

s25 L sCharge PoE Lightning 

s25 m sCharge PoE microUSB

s25 C sCharge PoE USB C

with 8pin Lightning cable
complete cable length 1.8ft (~55cm)
with micro USB adapter cable, 
complete cable length 1.8ft, (~55cm)
with USB C adapter cable, 
complete cable length 1.8ft, (~55cm)

Injectors

si-26-1-EU

si-26-1-US

  • Single Port PoE Injector
  • with 24 volt power supply
  • for Europe
  • Single Port PoE Injector
  • with 24 volt power supply
  • for US

si-26-8-EU

si-26-8-US

  • 8 Port PoE Injector
  • with 48 volt, 60 watt power supply
  • connect up to 8 sDocks
  • for Europe
  • 8 Port PoE Injector
  • connect up to 8 sDocks
  • for US

 

Buy at:

Currently the PoE Chargers are not in a distribution in all countries. You can order the products then directly at
smart things.
Simply write an email : info@smart-things.com