Charge your iPads with PoE.


with an existing 'Power over Ethernet' network:





Installation with a powered switch

If you can use an existing  PoE network, meaning
that a PoE switch delivers power to your ethernet,  
only one of our s15 splitters connected to this network will be necessary to power your iPad.

s15 L  for sDock Fix and sDocks (2.
 generation)
s15 m  for sDocks (1. generation)

PoE
s15 = Splitter + adapter cable
s15 is a splitter for active PoE solutions with input of 44 - 56 Volts. IEEE 802.3af compliant. PoE Splitter WT-AF-5V10W
Professional solution with Gigabit data. 

Perfect for conference rooms, kiosks and anywhere else you need a digital display.

Charge iPads from your existing PoE switch with these 5 volts Power over Ethernet splitter/converters. Stream data with an Apple Ethernet to Lightning adapter for wired data.

Place your touchscreen display where you want, not where the charging adapter can reach. Normal 5 volts charging cables for tablets won’t work efficiently for more than a few feet, but our 5 volts PoE splitters and PoE kits can run for hundreds of feet.




s15 L   sCharge PoE 4856 Lightning


s15 m   sCharge PoE 4856 micro USB


with Apple Lightning cable  
total cable length  55cm (~1.8 ft)

s15 L factsheet


with micro USB cable  
total cable length  55cm (~1.8 ft)

s15 m factsheet


without a 'Power over Ethernet' network


PoE Installation 
of a single iPad

If there is no existing PoE network,  you'll need a power source (Single Port Injector) and a suitable splitter. 

s25 L  for sDock Fix and sDocks (2. generation)
s25 m  for sDocks (1. generation)



si-26-1





PoE Installation 
of multiple 
iPads


With the 60W 8-port Injector Kit si-26-8  
up to  8 iPads can be powered very easily and reliable.
The s25 splitter either with Lightning or micro USB connector connects with the iPad.
Plug & Play.

si-26-8

s25 = Splitter + Adapter cable

Passive PoE Splitter WS-PoE-5V-2Amps  for input of 10 - 40 Volts.
Together with a 24 volts power supply and a single or 8 port PoE injector it is an easy power solution for a distance up to 100m (328 ft)

Perfect for conference rooms, kiosks and anywhere else you need a digital display.
Stream data with an Apple Ethernet to Lightning adapter for wired data.

Splitter

s25 L sCharge PoE 1040 Lightning 

s25 m sCharge PoE 1040 microUSB

with 8pin Lightning cable
complete cable length 1.8ft (~55cm)
with micro USB adapter cable, 
complete cable length 1.8ft, (~55cm)
  
  

Injectors 

si-26-1-EU

si-26-1-US

  • Single Port PoE Injector
  • with 24 volt power supply
  • for Europe
  • Single Port PoE Injector
  • with 24 volt power supply
  • for US

si-26-8-EU

si-26-8-US

  • 8 Port PoE Injector
  • with 48 volt, 60 watt power supply
  • connect up to 8 sDocks
  • for Europe
  • 8 Port PoE Injector
  • connect up to 8 sDocks
  • for US

 

Buy at:

Currently the PoE Chargers are not in a distribution in all countries. You can order the products then directly at
smart things.
Simply write an email : info@smart-things.com